Eflite Blade SR Belt kit. NOW supplied with pre-assembled tail. Pictures soon
This an after-market modification to suit
The Eflite Blade SR RTF helicopter. The model is a great beginner helicopter but the tail needs to be improved.
The kit has been designed to GREATLY improve tail control. No more wagging tails, buzzing tail motors and replacing
failed motors/ESC's etc.
Very solid tail. Spend more time controlling the helicopter instead of the tail.
Economical to run
(no more replacing failed tail motors or burnt out electronics).
Consistent tail control after every flight. No need to compensate for worn brushes, heat etc.
Durable aluminum, fiberglass and nylon parts.
Very little difference in flight time compared to the stock tail motor, less than a minute.
No need to change any radio gear. Uses the stock radio, gyro, main motor and ESC. Will require a tail servo.
Installation is simple and will only requires 2 holes to be drilled into the main frame and one in the boom. A drill and guide set is available as an option. All parts (mechanics only) are included
in the kit. You will require a tail servo.
Recommend tail servo:
Futaba 3114, Futaba S3154 digital, DS65HB digital, Skyartec VTS-03A. Or any micro servo with a speed of 0.10 seconds or less.
Check out the RCGroups
thread with flight video.
Standard kit includes:
Aluminum main pulley (48T or 49T, depending on supply), ball bearing guide rollers, complete plastic pre-assembled tail assembly, belt, CARBON fins, servo clamps and push rod.
Drill guide set, metal tail assembly, hardened black aluminum boom, tail brace set
Parts listing here
Assembly instructions now available, click here
Stock arriving weekly.